HB-1, dry bath, is a temperature controlled heating block, with wide temperature working range from room temperature to 200℃, less than 1℃ deviation. Over temperature cutoff safety design as standard, OFFSET function included. The unit target for nucleic acid / protein denaturation, hot start PCR, enzyme reaction, melting agar, immunoassay, and COD reaction. Various blocks suitable for different size tubes.
| Model |
HB-1 |
HB-2 |
| Temperature range |
30 °C to 200 °C |
| Temperature stability |
1 °C @ 100 °C by 120 minutes test |
| Temperature uniformity |
< 0.5 °C @ 100 °C |
| Temperature accuracy |
< 1 °C @ 100 °C (@230V/50Hz, 115V/60Hz) |
| Temperature controller |
Pre-calibrated |
| Display and control |
Two large size four digital LED display |
| Temperature calibration |
Built-in and pre-calibrated |
| Heating rate |
< 18 minutes from ambient to 100 °C @ 230V, 50Hz |
| Number of blocks |
1 |
2 |
| Heat power (Watt) |
250W |
500W |
| Over temperature cutoff |
212 °C |
| Timer |
0-999 minutes |
| Power |
120/60Hz; 230V/50Hz, voltage variation < 2% |
| Cabin dimensions (mm) |
102 x 78 x 46 (W x D x H) |
156 x 102 x 80(W x D x H) |
| Physical dimensions (mm) |
310 x 250 x 80 (W x D x H) |
| Weight w/o block (kg) |
3.3 |
4.8 |
| Certification |
CE |
The spec is subject to change without prior notice.
|
|
Features
Low cost, safe heating device at laboratory
Selectable wide variety aluminum block
No more external temperature probe
COD reactor.
Ordering Information
| Catalog Number |
Description |
| 1092001 |
HB-1 Block Heater with block extractor and an aluminum block for 12 x 16mm test tubes, 120V |
| 1092002 |
HB-1 Block Heater with block extractor and an aluminum block for 12 x 16mm test tubes, 230V |
| 1092003 |
HB-1 Block Heater with block extractor and an aluminum block for 20 x 1.5ml microtubes, 120V |
| 1092004 |
HB-1 Block Heater with block extractor and an aluminum block for 20 x 1.5ml microtubes, 230V |
| 1092005 |
HB-1 Block Heater with block extractor and an aluminum block for 30 x 0.5ml microtubes, 120V |
| 1092006 |
HB-1 Block Heater with block extractor and an aluminum block for 30 x 0.5ml microtubes, 230V |
| 1092011 |
HB-1 Block Heater w/o block, 120V |
| 1092012 |
HB-1 Block Heater w/o block, 230V |
Download
| Flyer |
| HB-1/HB-2 block heater |
 |
| Technical Bulletin |
| Block Heater Operation |
|
|
|
 |
Accessories |
|
|
|
|
| |
 |
| Block Extractor |
|
Block Extractor for Block Heater
|
|
|
|
|
| |
 |
| Aluminum block (12) |
|
12 x 16 mm test tubes aluminum block for HB-1/HB-2
|
|
|
|
|
| |
 |
| Aluminum block (20) |
|
20 x 1.5 ml microtubes aluminum block for HB-1/HB-2
|
|
|
|
|
| |
 |
| Aluminum block (30) |
|
30 x 0.5 ml microtubes aluminum block for HB-1/HB-2
|
|
|
|
|
| |
 |
| Aluminum block (88 x 0.2 ml) |
|
88 x 0.2ml microtubes aluminum block for HB-1/HB-2.
|
|
|
|
|
| |
 |
| Aluminum block (12 x 19 mm) |
|
12 x 19mm test tubes aluminum block for HB-1/HB-2.
|
|
|
|
|
| |
 |
| Aluminum block (24 x 1.5 ml) |
|
24 x 1.5ml microtubes aluminum block for HB-1/HB-2.
|
|
|
|
|
| |
 |
| Aluminum block (15 x 16 mm) |
|
15 x 16mm test tubes aluminum block for HB-1/HB-2.
|
|
|
|
|
|
|
|
|
Related Products |
|
|
|
|
| |
 |
| GES |
|
GES Cell complete system, GES-cell accompanies with a 7 x 15cm tray, one 15 x 1.0mm teeth and one 20 x 1.0mm teeth fixed-height comb. GES Family is designed for general applications of horizontal gel electrophoresis. GES cells are suitable for quick running and fast screening of nucleic acid samples in agarose gel matrix. The high-quality molded design offers high resolution and reproducibility results. |
|
|
|
|
| |
 |
| E-centrifuge |
|
E-Centrifuge, a personal bench-top mini centrifuge for quick spin down of contents, or settling applications requiring, can speeds up to 2000 x g with micro-centrifuge tubes. The standard unit comes with rotors for 1.5/2.0 ml micro-centrifuge tubes and 8-strip tubes. |
|
|
|
|
| |
 |
| V-GES |
|
The V-GES vertical gel electrophoresis system includes an electrophoresis tank, electrode module, and two casting modules for casting and running up to two SDS-PAGE/native PAGE-gels simultaneously. A clever casting module design offers extremely easy and leak-free operation without the need for screws. A selection of spacers and combs allows for the user to cast gels of different thickness and well number according to requirements. |
|
|
|
|
| |
 |
| ELITE 300 Power Supply |
|
The ELITE 300 power supply is perfect for submerged horizontal and mini vertical gel electrophoresis applications. The constant Current/ Voltage output control with timer setting provides the easy handling of the experiments. It can connect up to 4 sets apparatus at once and has light, compact, and space saving design.
|
|
|
|
|
| |
 |
| Block Cooler |
|
Wealtec’s compact bench top dry cooling unit, Block Cooler is ideal for life science applications. It's required cooling as well as heating of micro-centrifuge tube samples to temperatures ranging from 0℃ to 75℃. Microprocessor temperature controller coupled with rapid and efficient Peltier cooling unit, CB-1 enables precisely temperature control specific for temperature sensitive experiments such as gene transfection. |
|
|
|
|
|
|
