HB-1/HB-2 are reliable bench top block heater in the market, target for all kinds laboratory use, high accuracy temperature control technique bring most trustable temperature requirement, variety Aluminum block select.
Target temperature and actual temperature display on two pieces four digit seven segment LED display, ambient temperature to 200°C, over heat protection at 220°C, heated and temperature balance by Red/Green LED indicator, °C / °F selectable, in-built platinum sensor for calibrated temperature profile, HB-1 for single block, HB-2 for dual block, both two models no need to additional temperature probe for temperature detection.
| Model |
HB-1 |
HB-2 |
| Temperature range |
30 °C to 200 °C |
| Temperature stability |
1 °C @ 100 °C by 120 minutes test |
| Temperature uniformity |
< 0.5 °C @ 100 °C |
| Temperature accuracy |
< 1 °C @ 100 °C (@230V/50Hz, 115V/60Hz) |
| Temperature controller |
Pre-calibrated |
| Display and control |
Two large size four digit LED display |
| Temperature calibration |
Built-in and pre-calibrated |
| Heating rate |
< 18 minutes from ambient to 100 °C @ 230V, 50Hz |
| Number of blocks |
1 |
2 |
| Heat power |
250W |
500W |
| Over temperature cutoff |
212 °C |
| Timer |
0-999 minutes |
| Power |
120/60Hz; 230V/50Hz, voltage variation < 2% |
| Cabin dimensions |
102 x 78 x 46 (W x D x H) |
156 x 102 x 80(W x D x H) |
| Physical dimensions |
310 x 250 x 80 (W x D x H) |
| Weight withouto block |
3.3kg |
4.8kg |
| Certification |
CE |
| The spec is subject to change without prior notice. |
|
Features
Low cost, safe heating device at laboratory
Selectable wide variety aluminum block
No more external temperature probe
COD reactor.
Download
| Flyer |
| HB-1/HB-2 block heater |
 |
| Technical Bulletin |
| Block Heater Operation |
|
|
|
 |
Accessories |
|
|
|
|
| |
 |
| Block Extractor |
|
Block Extractor for Block Heater
|
|
|
|
|
| |
 |
| Aluminum block (12) |
|
12 x 16 mm test tubes aluminum block for HB-1/HB-2
|
|
|
|
|
| |
 |
| Aluminum block (20) |
|
20 x 1.5 ml microtubes aluminum block for HB-1/HB-2
|
|
|
|
|
| |
 |
| Aluminum block (30) |
|
30 x 0.5 ml microtubes aluminum block for HB-1/HB-2
|
|
|
|
|
| |
 |
| Aluminum block (88 x 0.2 ml) |
|
88 x 0.2ml microtubes aluminum block for HB-1/HB-2.
|
|
|
|
|
| |
 |
| Aluminum block (12 x 19 mm) |
|
12 x 19mm test tubes aluminum block for HB-1/HB-2.
|
|
|
|
|
| |
 |
| Aluminum block (24 x 1.5 ml) |
|
24 x 1.5ml microtubes aluminum block for HB-1/HB-2.
|
|
|
|
|
| |
 |
| Aluminum block (15 x 16 mm) |
|
15 x 16mm test tubes aluminum block for HB-1/HB-2.
|
|
|
|
|
|
|
|
|
Related Products |
|
|
|
|
| |
 |
| GES |
|
Horizontal gel electrophoresis system, GES with variable tray selection of 10 x 15cm, 7 x 15cm, and 15 x 15 cm is the ideal submarine cell made by injection mode technology for DNA and RNA separation. GES systems can run up to 40 samples at a time. Unique Dams-claw design guarantees no leakage while gel casting. Quick assembling L type electrode is easily to be cleaned and replaced. |
|
|
|
|
| |
 |
| E-centrifuge |
|
Benchtop mini centrifuge, E-Centrifuge, with adorable appearance, designed for quick spin down, elution, and separation. Supply with interchangeable angle rotor with 6 positions of 1.5 / 2.0ml tubes, and strip rotor with 8 x 2 positions of 0.2ml PCR tubes. Optional adapter is available for 0.4 / 0.5ml tubes, and interlock switch secures top lid suddenly opened. |
|
|
|
|
| |
 |
| V-GES |
|
V-GES, the midi vertical electrophoresis system, comprises with tank, electrode module, casting module, and optional blotting module. Electrophoresis tank was built by injection mode technology. Special anti-leak rubber and clasp-release design guarantee leakage free while gel casting. Three thicknesses spacers, 0.5, 0.75 and 1.0mm, and two types comb, 10 and 15 well are available. V-GES is specialized designed for running two gels simultaneously. The system provides the minimal change in temperature on electrophoresis and no extra cooling device needed. ELITE series are recommended power supplies for combination as a perfect electrophoresis system. |
|
|
|
|
| |
 |
| ELITE 300 Power Supply |
|
The Elite 300, provides the maximum voltage output of 300V and current output 400mA, with 4 sets output terminal mainly for routine electrophoresis with nucleic acid and SDS-PAGE. With high accuracy and stable output applicable for wet transfer. Easy control Constant V/A with automatic crossover, adjustable voltage and current in minimum 1 V and 1 mA increment provide flexible condition and parameter settings. Three digits seven segments LED readout voltage, current and time. Error messages includes no load detection, sudden load change, over voltage protection, automatic recovery after power failure, short circuit, and current differential alarm for easy troubleshooting. IQ / PQ / OQ protocol is available.
|
|
|
|
|
| |
 |
| Block Cooler |
|
Block Cooler equipped with 9 preset temperature programs with temperature range 0 - 75°C and less than 0.5°C deviation. Nine preset programs include: 0°C for ingredient storage, 4°C for cell lysis / cDNA synthesis, 16°C for DNA ligation, 25°C for restriction enzyme reaction, 37°C for denaturation in DNA extraction / cDNA synthesis, 42°C for reverse transcription / gene transformation, 55°C for gentle heating in DNA extraction, 65°C for proteinase K inactivation, and 72°C for polymerase reaction. Top lid for heat isolated, and OFFSET function is also included. |
|
|
|
|
|
|
