|
V-GES
V-GES, the midi vertical electrophoresis system, comprises with tank, electrode module, casting module, and optional blotting module. Electrophoresis tank was built by injection mode technology. Special anti-leak rubber and clasp-release design guarantee leakage free while gel casting. Three thicknesses spacers, 0.5, 0.75 and 1.0mm, and two types comb, 10 and 15 well are available. V-GES is specialized designed for running two gels simultaneously. The system provides the minimal change in temperature on electrophoresis and no extra cooling device needed. ELITE series are recommended power supplies for combination as a perfect electrophoresis system.
Power Supply
The Elite 300 plus, provides the maximum voltage output of 300V and current output 500mA, with 4 sets of output terminals mainly for routine electrophoresis with nucleic acid and SDS-PAGE. With high accuracy and stable output applicable for wet transfer. Easy control Constant V/A with automatic crossover, adjustable voltage and current in minimum 1 V and 1 mA increment provide flexible condition and parameter settings. Three digits seven segments LED readout voltage, current and time. Error messages includes no load detection, sudden load change, over voltage protection, automatic recovery after power failure, short circuit, and current differential alarm for easy troubleshooting. IQ / PQ / OQ protocol is available.
V-GES
| Gel size (mm) |
100 x 80 (W x H) |
| Gel thickness (mm) |
0.5 / 0.75 / 1.0 |
| Sponge size (mm) |
- |
| Applicable number of samples |
10 to 30 |
| Number of gels |
1 or 2 gels |
| Transfer capability |
- |
| Blotter module |
- |
| Buffer requirement (ml) |
- |
| Upper buffer volume (ml) |
250 to 300 |
| Lower buffer volume (ml) |
500 to 1,400 |
| Cassette dimensions (mm) |
- |
| Distance cathode to anode |
- |
| Electrode module w/ platinum wire |
For 1 or 2 gels operation* |
| Casting module |
2 sets for gel casting* |
| Glass plate |
5 sets |
| Selectable comb teeth |
10/15 teeth |
| Comb thickness (mm) |
0.5 / 0.75 / 1.0 |
| Physical dimensions (mm) |
200 x 130 x 165 (W x D x H) |
| Weight (kg) |
3 |
| Certification |
CE |
| Recommend Power Supply |
ELITE 200 / 300 / 300PLUS / 600U |
The spec is subject to change without prior notice.
Clasp-release design* is the patent of Wealtec Bioscience
Patent No.: M277920/ ZL 2005 2 0009035.8 / Nr. 20 2005 005 050.4 /
2005-002015 /US 7,5,44,279 B2
|
|
ELITE 300 PLUS
| Voltage automatic |
Yes |
| Current automatic |
Yes |
| Output Terminals |
4 sets |
| Current adjust steps |
4-500mA in 1 mA |
| Voltage in 1 volt steps |
10-300 V |
| Output power |
90 W max. |
| Operating Temperature |
0-40℃ |
| Timer |
0-999 mins |
| Display |
3 digit 7 seg LED |
| Touch Pad |
Yes |
| Alarm |
Yes |
| Input Power |
120V / 230V , 50/60 Hz |
| Physical dimensions (mm) |
240 x 320 x 73 (W x D x H) |
| Weight (kg) |
2.0 |
| Certification |
CE |
*The spec is subject to change without prior notice.
**ELITE 200/300/200U/300U/600U power supply comply with EN 61010-1
|
|
Features
Interchangeable module for SDS-PAGE electrophoresis and blotting Sufficient buffer with no need for extra cooling device Sandwich cassette assembly clamps for blotting Capable of transferring two gels simultaneously Anti-leakage clasp-release gel casting module Designed for protein and DNA electrophoresis Easy handling and no maintenance design No load detection, sudden load change, over voltage protection, automatic recovery after power failure, short circuit, current differential alarm Three digit seven segment LED read out voltage, current and time Small footprint, stackable, outshell use fire resistance material Trustable and accurate power source in the market Complete error messages for trouble shooting Membrane key pad for functional setting Up to four sets output
Ordering Information
| Catalog Number |
Description |
| 1031111 |
V-GES(0.5mm) complete system + power supply, system includes electrode module, electrophoresis tank, casting module/2 set, glass plate set/5 sets, 0.5mm spacer/4 pcs, 0.5mm 10 teeth comb/2 pcs, One-gel gate, Alignment card, Glass plate separator, instruction manual, ELITE 300 Plus Power Supply, 120V, 50/60Hz |
| 1031112 |
V-GES(0.5mm) complete system + power supply, system includes electrode module, electrophoresis tank, casting module/2 set, glass plate set/5 sets, 0.5mm spacer/4 pcs, 0.5mm 10 teeth comb/2 pcs, One-gel gate, Alignment card, Glass plate separator, instruction manual, ELITE 300 Plus Power Supply, 230V, 50/60Hz |
| 1031113 |
V-GES(0.75mm) complete system + power supply, system includes electrode module, electrophoresis tank, casting module/2 set, glass plate set/5 sets, 0.75mm spacer/4 pcs, 0.75mm 10 teeth comb/2 pcs, One-gel gate, Alignment card, Glass plate separator, instruction manual, ELITE 300 Plus Power Supply, 120V, 50/60Hz |
| 1031114 |
V-GES(0.75mm) complete system + power supply, system includes electrode module, electrophoresis tank, casting module/2 set, glass plate set/5 sets, 0.75mm spacer/4 pcs, 0.75mm 10 teeth comb/2 pcs, One-gel gate, Alignment card, Glass plate separator, instruction manual, ELITE 300 Plus Power Supply, 230V, 50/60Hz |
| 1031115 |
V-GES(1.0mm) complete system + power supply, system includes electrode module, electrophoresis tank, casting module/2 set, glass plate set/5 sets, 1.0mm spacer/4 pcs, 1.0mm 10 teeth comb/2 pcs, One-gel gate, Alignment card, Glass plate separator, instruction manual, ELITE 300 Plus Power Supply, 120V, 50/60Hz |
| 1031116 |
V-GES(1.0mm) complete system + power supply, system includes electrode module, electrophoresis tank, casting module/2 set, glass plate set/5 sets, 1.0mm spacer/4 pcs, 1.0mm 10 teeth comb/2 pcs, One-gel gate, Alignment card, Glass plate separator, instruction manual, ELITE 300 Plus Power Supply, 230V, 50/60Hz |
|
|
|
 |
Accessories |
|
|
|
|
|
|
|
|
Related Products |
|
|
|
|
| |
 |
| Block Heater |
|
Block Heater, single aluminum block module with built-in temperature sensor is an accurately temperature controlled dry bath. Various types of interchangeable blocks specified for test tubes, micro-centrifuge tubes, and PCR reaction tubes, facilitate varied experiments. With temperatures settable from 30℃ to 200℃, the heater is ideal for application such as hot start PCR, restriction enzyme digestions, nucleic acid/protein denaturation, enzyme kinetics reaction, and melting agar. |
|
|
|
|
| |
 |
| Block Cooler |
|
Wealtec's compact bench top dry cooling unit is ideal for life science applications requiring cooling as well as heating of microtube-samples to temperatures ranging from 0°C to 75°C. Rapid and efficient Peltier cooling and microprocessor controlled temperature control enables for the exact target temperatures to be reached, every time, which enables for sensitive incubation applications such as bacterial cell gene transfer. |
|
|
|
|
|
|
|
